Case SV208, SV210 Vibratory Roller Service Manual

Table of Contents

• Content
• Introduction
• Engine
• Power Coupling
• Hydrostatic drive
• Brakes and Controls
• Hydraulic System
• Frames and Ballasting
• Steering
• Wheels
• Cab Climate Control
• Electrical System

Manual Extract: Compaction/vibration hydraulic system – Change fluid

NOTICE: Oil is best changed after roller operation, when the impurities are diffused within the medium.
1. Park the roller on a flat, paved area so that the drain plug (1) on the left-hand side of the drum is in its lowest position.
2. Place a suitable container underneath the plug.
3. Remove all the plugs and drain the oil.
4. Once drained, reinstall the drain plug (1).
5. Use the filler hole (2) to replenish the oil. Fill to the edge of the inspection hole (3).
6. Reinstall the remaining plugs