Overview
The Massey Ferguson 3707, 3708, 3709 and 3710 Tractor Manual provides operating instructions, safety information, maintenance guidance and technical specifications for these Massey Ferguson 3700 Series agricultural tractors. The documentation covers tractor identification, cab and open operator station controls, mechanical and Power Shuttle transmissions, instrument displays, differential locks, four-wheel drive, power take-off operation, hydraulic linkage controls, trailer equipment and routine servicing.
Technical information includes engine and transmission error-code references, diesel particulate filter regeneration, electrical fuse and relay identification, electronic hitch controls, hydraulic auxiliary valves, periodic maintenance schedules and lubricant capacities. The manual also provides procedures for checking and replacing engine and transmission fluids, servicing filters, inspecting drive belts, maintaining lighting equipment and checking tractor systems, together with travel-speed tables, PTO specifications, tyre combinations and axle track adjustments.
Notice: The documentation includes different control and equipment arrangements for cab and OOS versions, mechanical and electronic controls, and Power Shuttle transmissions. Individual instructions apply according to the tractor’s installed configuration.
Table of Contents
Massey Ferguson 3707, 3708, 3709, 3710 Manual
- 01. Tractor Identification and Measurement Units
- Tractor Introduction
- Tractor Identification Information
- Tractor Identification Details
- Tractor Serial Number Locations
- Metric and Imperial Measurement Abbreviations
- 02. Safety Instructions, Protective Equipment and Warranty
- General Safety Instructions
- Safety Symbols and Terminology
- Personal Risk and Accident Prevention
- Forestry Application Safety
- Precautions Before Starting the Tractor
- Personal Protective Equipment
- Noise Protection
- Safe Use of Steps and Handgrips
- Tractor Condition and Safe Operation
- Safety During Adjustments and Maintenance
- Cooling System Maintenance Safety
- Hydraulic System Safety
- Electrical System Safety
- Supporting the Tractor During Maintenance
- Road Operation and Transportation Safety
- Safe Towing Procedures
- Tractor Track Adjustment Precautions
- Fuel Handling Safety
- Roll-Over Protective Structures (ROPS)
- Falling Object Protective Structures (FOPS)
- Operator Protective Structures (OPS)
- Front Loader Safety Precautions
- Attachments and Accessories
- Rotating Drivelines and Seat Belt Safety
- Passenger and Stationary Work Precautions
- Harmful Products and Waste Handling
- Fuel Circuit Precautions
- Safe Tyre Servicing
- Parking, Towing and Transporting
- Tractor Vibration Exposure Information
- European Regulation 1322/2014 Safety References
- Instruction and Safety Labels
- Entering and Exiting the Tractor
- Emergency Exit
- Tractor Warranty Information
- Pre-Delivery Inspection and Commissioning
- Warranty Procedures
- Warranty Procedures When Changing Regions
- Servicing During and After the Warranty Period
- 03. Tractor Operation, Controls and Hydraulic Equipment
- Cab Version – Mechanical Control Layout
- OOS Version – Mechanical Control Layout
- OOS Version – Power Shuttle Low Specification Control Layout
- Cab Version – Electronic Control Layout
- Checks Before Starting the Tractor
- Starting and Stopping the Tractor
- Shuttle Lever Operation
- Transmission Range Lever
- Transmission Gear Lever
- Comfort Control Switch
- Clutch Operation
- Brake Controls
- Hand Throttle and Accelerator Pedal
- Main Electrical Switch
- Multifunction Control Lever
- Steering Wheel Controls
- Battery Cut-Off Switch
- Instrument Cluster
- Digital Display Information
- Diesel Particulate Filter Regeneration
- Display Language and Measurement Unit Settings
- Transmission Error Information
- Engine Error Information
- Speed Pulse and Software Information
- Engine Oil Reset Counter
- Cruise Control Memory Button
- Diagnostic Error Code List
- Tractor Lighting Controls
- Heater and Air Conditioning Controls
- Air Conditioning Operation
- Fuse and Relay Box Locations
- Fuse and Relay Identification
- Engine Fuse Box
- Additional Electrical Fuses
- Electrical Power Sockets
- Tractor Tool Box
- Tractor Ballast
- Differential Lock Operation
- Differential Lock Control Logic
- Four-Wheel-Drive Operation
- Four-Wheel-Drive Control Logic
- Power Take-Off Operating Instructions
- Connecting PTO-Driven Implements
- Attaching Equipment to the PTO Shaft
- Power Take-Off Engagement and Disengagement
- PTO Indicator Light and Speed Display
- Ground Drive PTO Speed Selection
- PTO Operation During Stationary Work
- PTO Warning Light Logic
- Front Power Take-Off Operation
- Three-Point Hitch System
- Hydraulic Lift Control Levers
- Lower Link End Adjustment
- Lower Link Hook-Type Ball Ends
- Electronic Hitch Control System
- External Electronic Hitch Control Buttons
- Remote Auxiliary Hydraulic Valves
- Auxiliary Hydraulic Valve Joystick Control
- Electrohydraulic Remote Valve Control
- Trailer Braking System
- Trailer Hitches with Sliding Guide Rails
- EEC/CUNA C Trailer Hitch Height Adjustment
- CUNA D2 Trailer Hitch Height Adjustment
- Trailer Hitches with Hole-Type Guide Rails
- Hole-Type Trailer Hitch Height Adjustment
- Swinging Drawbar Operation
- Swinging Drawbar Length Adjustment
- Drawbar Maximum Permissible Vertical Load
- Swinging Drawbar Height Adjustment
- Tractor Radio and Accessories
- 04. Periodic Maintenance, Inspection and Servicing
- General Tractor Maintenance
- Lubrication and Periodic Servicing
- Safe Tractor Maintenance Procedures
- Air Conditioning System Maintenance
- Electrical System Maintenance
- Light Bulb Replacement Safety Instructions
- Headlight Alignment and Adjustment
- Headlight Bulb Replacement
- Rear Work Light Bulb Replacement
- Tail Light and Turn Signal Bulb Replacement
- Cab Working Light Bulb Replacement
- Tyre Maintenance
- Steering Angle Adjustment
- Battery Removal Procedure
- Power Shuttle Electronic Control Unit
- Windscreen Washer System Maintenance
- Removing Air from the Fuel Circuit
- Tractor Jacking Points
- Periodic Maintenance Table
- Engine Oil Level Inspection
- Engine Oil Draining
- Engine Coolant Level Inspection
- Transmission and Hydraulic Oil Level Inspection
- Front Power Take-Off Oil Level Inspection
- Brake System Oil Level Inspection
- Air Cleaner Dust Valve Cleaning
- Tractor Lubrication Points
- Neutral Start System Inspection
- Neutral Start Inspection – Mechanical Reverse Transmission, 12/12 and 24/24
- Neutral Start Inspection – Power Shuttle Transmission, 24/12
- Engine Fan Belt Tension Inspection
- Air Conditioning Compressor Belt Tension Inspection
- Cab Air Filter Removal and Cleaning
- Wheel Bolt Tightening and Tyre Pressure
- Air Cleaner Restriction Indicator
- Transmission Oil Filter Sensor
- Front Axle Final Drive Oil Level Inspection
- Front Axle Differential Oil Level Inspection
- Front Axle Housing Oil Level Inspection
- ROPS and Cab Fastener Inspection
- Air Intake Filter Replacement
- Transmission and Hydraulic Oil Replacement
- Oil Suction Strainer Replacement
- Fuel Filter Replacement
- Engine Oil and Filter Replacement
- Front PTO Oil Replacement
- Transmission and Hydraulic Oil Filter Cartridge Replacement
- Third-Pump Hydraulic Oil Filter Cartridge Replacement
- Engine Fan Belt Replacement
- Air Conditioning Compressor Belt Replacement
- Fuel Tank Draining
- 05. Technical Specifications, Capacities and Tractor Dimensions
- Recommended Lubricants and Additives
- Fluid and Lubricant Capacities
- General Tractor Technical Specifications
- Tractor Dimensions
- Tractor Weights
- Transmission Travel Speed Tables
- Power Take-Off Speed Specifications
- Approved Tyre Combination References
- Tyre Load Capacity
- Tyre Distance and Spacing Diagrams
- Front Wheel Track Width Charts
- Rear Wheel Track Width Charts
Identifying the Correct Transmission and Control Configuration
The Massey Ferguson 3700 Series documentation separates mechanical and Power Shuttle transmission arrangements, with different operator control layouts for cab and OOS tractors. Maintenance instructions also distinguish 12/12 and 24/24 mechanical reverse transmissions from the 24/12 Power Shuttle version when checking the neutral start system. These differences are important when selecting the appropriate operating and servicing references.
Electronic hitch control, auxiliary hydraulic valve operation, PTO controls and four-wheel-drive engagement are documented in their own sections. The technical specifications provide model reference information for travel speeds, PTO speeds, tyre combinations and front and rear track settings. Use the tractor’s identification details and installed equipment to select the corresponding operating information.
Reviews
There are no reviews yet.